You can read the m365 errors in three different places
1) Mobile application, if the BLE connecion avaliable.
2) Long and short beeps
3) Long and short flashes of the green led on the ESC (Main controller)
All errors has two digits. The count of long signals is first digit and the count of short signals is the second one. Codes discription is based on firmware analisis and experiments. V1.3.0 firmware was used.
10 – BLE module communicaion error (not confirmed)
11, 12, 13, 28, 29 – Current sensors calibration errors or Power MosFET error
14, 15 – throttle and brake errors
18 – Hall sensors error
21 – Battery communication error
22, 23 – Bad BMS serial number
24 – Wrong supply voltage
27, 39 – ESC has wrong serial number in memory or “not activated”
35
36 – Battery temperature sensor error or overheating
40 – Main controller temperature sensor error or overheating
No more codes was found. Codes descriptions will be updated.